!!! Для тех, кто знает и делает сам

!!! Для тех, кто знает и делает самостоятельно !!!
————————————————————————————————————————————————————————————————————
Адрес KMS нужно выставлять 127.0.0.2 (а не 127.0.0.1 и не localhost)
————————————————————————————————————————————————————————————————————


Первичная установка Office
——————————————————————————
1. Запустите KMSmicro и произведите синхронизацию времени (T)
2. Импортируйте в реестр необходимые данные. Дважды щелкните по файлу:
Office2010-Localhost.reg в случае установки Office 2010;
Office2013-Win7-Localhost.reg в случае установки Office 2013 на Windows 7;
Office2013-Win8-Localhost.reg в случае установки Office 2013 на Windows 8.
3. Установите Office|Visio|Project VL.
4. Запустите приложение и проверьте статус активации. Если вдруг увидите, что требует активации, закройте приложение, подождите 1-2 минуты
и проверьте статус активации еще раз.
Редко, но такое бывает. Обычно продукт активируется сразу после установки
5. Закройте KMSmicro (S)

Активация уже установленного Office
———————————————————————————————————
1. Запустите KMSmicro и произведите синхронизацию времени (T)
2. Запустите один из следующих cmd-файлов от имени Adminstrator:
Office 2010 Activate.bat Office 2010-x32 & Windows-x32 или Office 2010-x64 & Windows-x64
Office 2010 (w64-o32) Activate.bat Office 2010-x32 & Windows-x64
Office 2013 Activate.bat Office 2013-x32 & Windows-x32 или Office 2013-x64 & Windows-x64
Office 2013 (w64-o32) Activate.bat Office 2013-x32 & Windows-x64.
3. Если в конце выполнения увидели «», продукт активирован/активация продлена.
4. Закройте KMSmicro (S)

Если активация не проходит
———————————————————————————————————
1. Вы пытаетесь активировать Retail версию продукта
2. Стенка/антивирус блокируют обмен
3. Истек счетчик уникальных запросов активации . Проверьте состояние вводом 10 для Office 2010 или 13 для Office 2013.
Значение «Current count» должно быть не меньше 4. Если вы увидели меньшее значение, значит счетчики надо накручивать.
Но это совсем другая история!

Hasil (Inggris) 1:

!!! For those who know and make yourself!!!
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
You need to set the KMS Address 127.0.0.2 (instead of 127.0.0.1 and localhost)
————————————————————————————————————————————————————————————————————


Первичная установка Office
——————————————————————————
1. Run KMSmicro and synchronize time (T)
2. Import the data into the registry. Double-click on the file:
Office2010-Localhost.reg if you installed Office 2010;
Office2013-Win7-Localhost.reg if you install Office on Windows 7 2013;
Office2013-Win8-Localhost.reg if you install Office on Windows 8 2013.
3. Install Office |Visio |Project VL.
4. Run the application and verify the activation status. If you suddenly see that requires activation, close the application, please wait 1-2 minute
and check activation status again.
Rarely, but it happens. Typically, the product is activated immediately after installation
5. Close the KMSmicro (S)

activation of already installed Office
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1. Run KMSmicro and synchronize time (T)
2. Run one of the following cmd files on behalf of Adminstrator had:
Office 2010 Office 2010-x 32 Activate.bat & Windows Office 2010 x 32 or x 64-Windows x 64
& Office 2010 (w64-o32) Activate.bat Office 2010-x 32 x 64 Windows
& Office 2013 Activate.bat Office 2013-x 32 x 32 or Windows & Office 2013-x 64-Windows x 64
& Office 2013 (w64-o32) Activate.bat Office 2013-x 32 x 64 Windows &.
3. If at the end of the saw "< Product activation successful >", the product is activated/activating extended.
4. close KMSmicro (S)

if activation fails
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
1. You are trying to activate the Retail version
2. Panel/antivirus blocking the exchange of
3. Unique count of activation requests expired. Check the status of the input 10 for Office 2010 or Office 2013 13.
The Current count value must be not less than 4. If you saw a lower value, then we should cheat counters.
but that's another story altogether!

Hasil (Inggris) 2:

!!! For those who know and do yourself KMS need to put 127.0.0.2 (not 127.0.0.1 and installing Office -------------------------- 1. Start KMSmicro and make the time synchronization (T) 2. Import the registry necessary data. Double-click on file: Office2010-Localhost.reg if you install Office 2010; Office2013-Win7-Localhost.reg when you install Office 2013 on Windows 7; Office2013-Win8-Localhost.reg if you install Office 2013 on Windows 8. 3 Install Office | visio | VL Project. 4. Run the application and check the status of activation. If you suddenly see that require activation, close the application, wait 1-2 minutes and check the status of the activation again. Rarely, but it happens. Typically, the product is activated immediately after the 5 . Close KMSmicro (S) activation is already installed Start KMSmicro and make the time synchronization (T) 2. Run one of the following cmd-file on behalf of the Adminstrator: Office 2010 Activate.bat Office 2010-x32 & Windows-x32 or Office 2010-x64-x64 Windows & Office 2010 (w64-o32 ) Activate.bat Office 2010-x32-x64 Windows & Office 2013 Activate.bat Office 2013-x32 & Windows-x32 or Office 2013-x64-x64 Windows & Office 2013 (w64-o32) Activate.bat Office 2013-x32 & Windows -x64. 3. If the end of a saw "


























"The product is activated / activation extended.
4. Close KMSmicro (S) If the activation is not You are trying to activate the Retail version of the product 2. Wall / antivirus blocking the exchange 3. Expired counter unique activation requests. Check the status of input 10 to Office 2010 or Office 2013 for 13. Meaning «Current count» must be at least 4 If you see a lower value, so it is necessary to wind counters. But that's another story!

Hasil (Inggris) 3:

!!! For those who know and makes its own !!!
————————————————————————————————————————— kms you need to stand 127.0.0.2 . Known Open Relay (and not 127.0.0.1 and not localhost)
—————————————————————————————————————————— Installing Office
--------------------------
1. Start KMSmiсrо and synchronize time (T)
2.Import the roster the necessary data. Double-click on the file:
office2010-localhost.reg if you are installing Office 2010 ;
office2013-Win7-localhost.reg if you are installing Office 2013 on Windows 7 ;
office2013-Win8-localhost.reg if you are installing Office 2013 on Windows 8.
3.Install Office|Visio|Project VL.
4. Run the application and check activation status. If by chance, you will see that requires activation, close the application, wait for 1-2 minutes
and check activation status again.
rarely,But such a case. Usually your product is activated immediately after installation
5. Close KMSmiсrо (S)lord activation is already installed Office
-----------------------------------
1. Start KMSmiсrо and synchronize time (T)
2.Run one of the following cmd files on behalf Adminstrаtоr:
Office 2010 Activate.bat Office 2010-x32 & windows-x32 or Office 2010-x64 & windows-x64
Office 2010 (w64-a32) Activate.bat Office 2010-x32 & windows-x64
Office 2013 Activate.bat Office 2013-x32 & windows-x32 or Office 2013-x64 & windows-x64
Office 2013 (w64-a32) Activate.Bat Office 2013-x32 & Windows-x64.
3. If at the end of the saw " ", product is activated/activation extended.
4. Close KMSmiсrо (S)lord if the activation is not passes
-----------------------------------
1.You are trying to activate retail version of the product
2. Wall/antivirus blocking exchange
3. Expired counter unique activation requests. Check the i/o 10 for Office 2010 or 13 for Office 2013.
The value "Current count" should not be less than 4. If you saw a smaller value, counters must be rational decisions.
but this is a different story!